Fida Power cable PB020
SKU PB020
Brand Fida
Photos
Key specifications
| SKU (English) | PB020, 462.295.005 |
|---|---|
| Cable length | 800 mm |
| Straight plug | yes |
| Temperature rating | high temperature rating |
| Voltage rating | high voltage |
| Insulation standard | silicone insulation is standard |
10.54 EUR
9.58EUR
in stock · 4
incl. 21% VAT · 7.92 EUR excl. VAT · shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Fida Power cable PB020 is an ignition cable with a length of 800 mm, featuring a straight plug. It is designed to connect the ignition transformer to the ignition electrode in burners and boilers. This cable is rated for high voltage and high temperature, with silicone insulation as standard. It is supplied under the Fida brand and has the SKU PB020, also referenced as 462.295.005.
Further details
| Confirmation required | confirm that the cable type matches the existing installation before ordering |
|---|---|
| Corrosion warning | corroded terminals or poor boot seal can cause moisture ingress and spark leakage |
| Failure imitation | hardened or cracked cable can imitate a faulty transformer |
| Function | connect the ignition transformer to the ignition electrode |
| Heat resistance near combustion | must handle heat near the combustion head |
| Inspection requirement | inspect for brittleness, cracking, or tracking marks |
| No further specs | no further technical specifications available from supplier data |
| Operating principle | transformer steps mains voltage up to the level that produces a spark at the electrode gap, and it works only during the ignition period under command from the burner control |
| Selection parameters | connector pattern at both ends, cable length, temperature rating of insulation |
Choosing and fitting
When selecting a replacement ignition cable of this type, key parameters to match are the connector pattern at both ends (transformer side and electrode side), the cable length, and the temperature rating of the insulation. Inspect the original cable for signs of brittleness, cracking, or tracking marks. Ensure the connection terminals are not corroded and the boot seals tightly against the electrode to prevent moisture ingress. Confirm that the cable type matches the existing installation before ordering.
Signs of failure
A hardened or cracked ignition cable can leak the spark to earth, which may imitate a faulty transformer. Symptoms include spark leakage, which can cause ignition failure or erratic operation. Check the cable for brittleness, cracking, or tracking marks, and inspect the connection terminals for corrosion or poor sealing.
All specifications
| SKU (English) | PB020, 462.295.005 |
|---|---|
| Cable length | 800 mm |
| Straight plug | yes |
| Temperature rating | high temperature rating |
| Voltage rating | high voltage |
| Insulation standard | silicone insulation is standard |
Part numbers
| SKU | PB020 |
|---|---|
| Additional article | 462.295.005 |
