Honeywell Control box 0620920U
SKU 0620920U
Brand Honeywell
Photos
Key specifications
| Safety time | 5 s |
|---|---|
| Flame detector type | 20 |
| Protection class (IP) | IP44 |
| Body material | transparent, non-flammable plastic |
| Weight incl. wiring base | 350 kg |
| Fuel | gas, gas-oil combination |
| Firing stages | two-stage |
| Operating voltage | 220 / 240 V (-15... +10%) |
| Mounting position | any |
| Ambient temperature | -20–60 °C |
| Weight including base | 350 g |
| Flame detection methods supported | ionization, infrared |
| Plug-in design | plug-in printed circuit boards |
| Display | colorful program display |
| EN 298 classification | btllxn |
| Power consumption | 10 W |
| Waiting time | 9 s |
| Voltage tolerance | -15...+10% |
| Amplifier sensitivity | 1 µA |
| Min. current from UV tube or ionisation probe | 5 µA |
| Time delay term.6 / term.C | 10 s |
| Frequency range | 50–60 Hz |
| Air proving switch | 6 |
| Infrared detector model | IRD 1020 |
| Drive mechanism | synchronous motor with speed reducer |
| Program cam positions | 12 |
| Air supply | forced draft |
| Housing type | transparent, non-flammable plastic removable casing |
| Pre-purge time | 24 s |
| Pre-ignition time | 8 s |
459.68 EUR
417.89EUR
in stock · 5
incl. 21% VAT · 345.36 EUR excl. VAT · shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
This is an automatic control box for two-stage, forced-draft burners operating on gas or gas-oil combinations. It runs on 220/240 V (-15...+10%), 50-60 Hz, and draws 10 W. Its timing sequence provides a 5 s safety time, 24 s pre-purge time, and 8 s pre-ignition time, and it supports flame detector cable lengths up to 20 m. The unit uses ionization or infrared flame detection (IRD 1020), and is enclosed in a transparent, non-flammable plastic removable casing rated IP44 for ambient temperatures from -20 to +60 °C.
Further details
| Air pressure monitor | working contact 4 A, 230 V |
|---|---|
| Classified acc. to EN 298 | BTLLXN |
| Fuse rating | max. 10 A rapid, 6 A slow |
| Infrared flare detector | IRD 1020 |
| Insulation standard | IP 44 |
| Mounting attitude | any |
| Permissable ambient temp. | -20° C... +60°C |
| Reset Button Type | backlit button for fault indication and reset |
| Serial Fuse | max. 10 A rapid, 6 A slow |
Fits equipment
Satronic MMI810.1 mod.35
All specifications
| Safety time | 5 s |
|---|---|
| Flame detector type | 20 |
| Protection class (IP) | IP44 |
| Body material | transparent, non-flammable plastic |
| Weight incl. wiring base | 350 kg |
| Fuel | gas, gas-oil combination |
| Firing stages | two-stage |
| Operating voltage | 220 / 240 V (-15... +10%) |
| Mounting position | any |
| Ambient temperature | -20–60 °C |
| Weight including base | 350 g |
| Flame detection methods supported | ionization, infrared |
| Plug-in design | plug-in printed circuit boards |
| Display | colorful program display |
| EN 298 classification | btllxn |
| Power consumption | 10 W |
| Waiting time | 9 s |
| Voltage tolerance | -15...+10% |
| Amplifier sensitivity | 1 µA |
| Min. current from UV tube or ionisation probe | 5 µA |
| Time delay term.6 / term.C | 10 s |
| Frequency range | 50–60 Hz |
| Air proving switch | 6 |
| Infrared detector model | IRD 1020 |
| Drive mechanism | synchronous motor with speed reducer |
| Program cam positions | 12 |
| Air supply | forced draft |
| Housing type | transparent, non-flammable plastic removable casing |
| Pre-purge time | 24 s |
| Pre-ignition time | 8 s |
Part numbers
| SKU | 0620920U |
|---|---|
| Additional article | 534.412.902 |
| Type designation | IRD 1020 |
