Brahma Gas solenoid valve E6G*S8*1/4*GMOC 13752004

The Brahma E6G*S8*1/4*GMOC gas solenoid valve (SKU 13752004) is a normally closed device designed for use in domestic and industrial gas installations. It operates on alternating current (230 V, 50–60 Hz) and is controlled by a direct current signal via a built-in bridge rectifier circuit. The valve has a nominal diameter of 8 mm, a flow capacity of 2 m³/h, and a power consumption of 20 W. It features a brass body, quick and silent opening, and is rated IP54. The valve closes and opens in 1 second, and can be installed vertically or horizontally.

When selecting a replacement gas solenoid valve of this type, ensure the nominal diameter, supply voltage, frequency, and connection type match the existing system. Verify the valve's flow capacity and pressure rating are compatible with the application. Installation must align the arrow on the body with the flow direction, and the valve should be mounted without dislodging the protective shell. Use an appropriately sized hex key and confirm the inlet pressure does not exceed the valve's set value.

Common failures in gas solenoid valves of this kind include coil burnout, sticking due to debris, or diaphragm damage, leading to the valve failing to open or close properly. Symptoms may include no gas flow, continuous gas flow when the valve should be closed, or erratic burner operation. Check for proper electrical supply, clean the valve internals, and verify the inlet pressure is within limits.