Brahma Ionization and ignition electrode K3,0 S2ALV 8-60 12100003
SKU 12100003
Model K3,0 S2ALV 8-60
Brand Brahma
Photos
Key specifications
| Electrode length | 140 mm |
|---|---|
| Ceramic part length | 60 mm |
| Metal part length | 62 mm |
| Clamp type | movable |
| Country of origin | Italy |
| Catalogue article numbers | 246.946.070 |
| Manufacturer code | 12100003 |
| Electrode type | ionization and ignition electrode |
| connection_type | P1+FASTON |
| Function | ignition and ionization |
| Application | burner system |
| Consumable part | yes |
| Model designation | K3.0 S2ALV 8-60 |
| Terminal arrangement | P1+FASTON |
| Electrode role | ignition or ionization |
| Positioning | directly in the flame zone |
| Failure: erosion | erosion of the electrode tip |
| Failure: insulator cracking | cracking of the ceramic insulator |
| Unit supplied | single unit |
—price on request
on order
shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
Brahma ionization and ignition electrode, model K3.0 S2ALV 8-60, SKU 12100003. It has a total length of 140 mm, with a ceramic part of 60 mm and a metal part of 62 mm. The clamp type is movable, and the connection type is P1+FASTON. This electrode is used for ignition and ionization in burner systems, positioned directly in the flame zone. It is a consumable part, supplied as a single unit, and originates from Italy.
Further details
| Failure: gap widening | gradual widening of the gap that delays ignition or causes flame loss |
|---|---|
| Failure: soot build-up | accumulation of soot that insulates the spark or signal |
| Pilot burner application | on burners equipped with a pilot burner, the pilot carries a small permanent or intermittent flame that lights the main burner and holds the flame signal; the ionization electrode in that circuit must be matched to the pilot assembly. |
| Replacement verification | verify that the insulator diameter, overall length, bend, and flaton / faston connector match the original part |
Choosing and fitting
When selecting a replacement electrode of this type, verify the overall length, bend angle, insulator diameter, spark gap, and mounting flange configuration to match the original. The terminal arrangement (e.g., P1+FASTON) and clamp type (fixed or movable) must also correspond. Measure the physical dimensions and compare with the burner's requirements before ordering.
Signs of failure
Typical failures include erosion of the electrode tip, cracking of the ceramic insulator, soot accumulation that insulates the spark or signal, and widening of the spark gap. These issues can cause delayed ignition, flame loss, or failure to detect flame. Inspect the electrode for visible damage and clean or replace as needed.
All specifications
| Electrode length | 140 mm |
|---|---|
| Ceramic part length | 60 mm |
| Metal part length | 62 mm |
| Clamp type | movable |
| Country of origin | Italy |
| Catalogue article numbers | 246.946.070 |
| Manufacturer code | 12100003 |
| Electrode type | ionization and ignition electrode |
| connection_type | P1+FASTON |
| Function | ignition and ionization |
| Application | burner system |
| Consumable part | yes |
| Model designation | K3.0 S2ALV 8-60 |
| Terminal arrangement | P1+FASTON |
| Electrode role | ignition or ionization |
| Positioning | directly in the flame zone |
| Failure: erosion | erosion of the electrode tip |
| Failure: insulator cracking | cracking of the ceramic insulator |
| Unit supplied | single unit |
Part numbers
| SKU | 12100003 |
|---|---|
| Additional article | 246.946.070 |
| Model | K3,0 S2ALV 8-60 |
