Brahma Ignition electrode RS58T6 128 11004207

This is a Brahma ignition electrode, model RS58T6 128, with SKU 11004207. It has a total length of 218 mm, an electrode diameter of 2 mm, and a rod length of 129 mm. The insulation is made of ceramic, and it is resistant to soot. This electrode is used in gas burners to deliver the spark for ignition.

When selecting a replacement electrode of this type, physical dimensions such as total length, rod length, electrode diameter, and insulator diameter must match the original. The mounting flange shape and bend angle must be compatible with the burner head. The gap between the electrode tip and the burner body or counter electrode should be set according to the burner manufacturer's specification. Always verify the electrode against the original burner documentation before ordering.

Typical failure modes include a worn or eroded tip, cracked ceramic insulation, and soot accumulation that can short-circuit the spark. A drifting gap may extend ignition time. When these issues occur, the burner may fail to ignite or have delayed ignition. Inspect the ceramic for cracks and clean any soot during replacement.