Steinen Oil nozzle 11.00GPH / 60SS
SKU 11.00GPH / 60SS
Brand Steinen
Photos
Key specifications
| Flow rate | 11 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | SS |
| Capacity | 11 gallons/hour |
| Catalogue number | 908.892.011 |
| Over-tightening effect | overtightening can distort the orifice |
38.81 EUR
35.28EUR
in stock · 8
incl. 21% VAT · 29.16 EUR excl. VAT · shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Steinen oil nozzle 11.00GPH / 60SS is a precision consumable part that atomizes fuel oil into a fine spray for efficient combustion. It has a capacity of 11 gallons per hour, a spray angle of 60 degrees, and a spray pattern of SS (semi-solid). The catalogue number is 908.892.011. Overtightening can distort the orifice.
Further details
| Application large burners | recommended for applications where large capacities are required |
|---|---|
| Combustion efficiency | necessary for efficient combustion and heat generation |
| Fuel atomization role | play a role in fuel atomization to ensure the correct fuel-air ratio |
| Nozzle Type | SS |
| Nozzle type description | general purpose nozzle in the larger sizes that delivers a semi solid cone spray distribution pattern |
| Replacement verification | confirm that the flow rate, angle and pattern match the existing nozzle |
| Sealing | always replace the nozzle gasket or sealing washer |
| Thread check | check the thread size before fitting |
| Torque specification | ensure the nozzle is torqued to the manufacturer's recommended value |
Choosing and fitting
Oil nozzles of this type are selected by matching the flow rate, spray angle, and spray pattern to the burner specification. The flow rate is typically given in GPH or kg/h at the reference pressure, the spray angle ranges from 30 to 80 degrees, and the pattern can be hollow, solid, or semi-solid. Before ordering, confirm these parameters and check the thread size if the old nozzle is damaged. Always replace the gasket or sealing washer and torque to the manufacturer's recommended value.
Signs of failure
When oil nozzles of this kind fail or are mismatched, symptoms include sooting, pulsation, or unstable ignition. These issues can arise from incorrect flow rate, spray angle, or pattern. Check the nozzle for clogging, wear, or damage, and verify that all three parameters match the burner specification.
All specifications
| Flow rate | 11 GPH |
|---|---|
| Spray angle | 60 ° |
| Spray pattern | SS |
| Capacity | 11 gallons/hour |
| Catalogue number | 908.892.011 |
| Over-tightening effect | overtightening can distort the orifice |
Part numbers
| SKU | 11.00GPH / 60SS |
|---|---|
| Additional article | 908.892.011 |
