Brahma Solenoid valve 13245501

The Brahma 13245501 is a normally closed solenoid valve designed for use with light liquid fuels in domestic and industrial systems. It operates on alternating current with a supply voltage of 230 V and a frequency of 50 Hz, consuming 11 W of power. The valve has a working pressure range of 0 to 20 bar and a flow rate of 0.055 m3/h. Its body is made of brass, and it features a three-core IP65 cable connection. The valve weighs 230 g and can be installed in any position, with a response time of less than or equal to 1 second.

When selecting a solenoid valve of this type, ensure that the supply voltage, frequency, and power consumption match the system's specifications. The valve's connection type and body material must be compatible with the existing piping and fuel type. Installation requires positioning the valve so that the arrow on its body aligns with the flow direction, and using the correct size hex key to avoid damaging the protective shell. A filter with a mesh size not exceeding 0.5 mm should be connected to the valve inlet to prevent foreign objects from entering.

Common failures of solenoid valves in this category include coil burnout, which may cause the valve to remain closed or open, leading to improper fuel flow. Leakage at the valve inlet or pipeline connection can occur due to loose fittings or damaged seals, resulting in fuel drips or pressure loss. If the valve fails to open or close promptly, it may be due to debris obstructing the valve seat or a faulty coil. Regular checks for tightness and proper operation are recommended, especially after repair or prolonged inactivity.