Honeywell Pressure switch DCM10
SKU DCM10
Brand Honeywell
Photos
Key specifications
| Protection class (IP) | IP54 |
|---|---|
| Setting range | 1–10 bar |
| Switching differential | 0.3 bar |
| Maximum working pressure | 25 bar |
| Construction type | differential pressure switch |
| Switching element | single-pole changeover switch |
| Function | detect overpressure |
| Adjustment method | adjustable from outside with screwdriver |
| Operating position | vertical |
830.54 EUR
755.04EUR
in stock · 1
incl. 21% VAT · 624.00 EUR excl. VAT · shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Description
The Honeywell DCM10 is a differential pressure switch used to detect overpressure. Its setting range is 1–10 bar with a switching differential of 0.3 bar, and it can handle a maximum working pressure of 25 bar. The switch uses a single-pole changeover switching element and is rated IP54 when installed vertically. The set point is adjustable from outside using a screwdriver.
Further details
| Application | general mechanical engineering, the printing industry, as well as in pneumatic and hydraulic systems |
|---|---|
| Body Material | seawater-resistant die cast aluminium gd al si 12 |
| Connection Thread | external thread g 1/2 (pressure gauge connection) according to din 16 288 and internal thread g 1/4 according to iso 228 part 1 |
| Contact arrangement | Single-pole changeover switch |
| Degree of protection | IP 54, in vertical position |
| Mounting | Directly on the pressure line (pressure gauge connection) or on a flat surface with two 4 mm Ø screws |
| Switching device | Robust housing (200) made of seawater-resistant die cast aluminium GD Al Si 12 |
| Switching pressure | Adjustable from outside with screwdriver |
Choosing and fitting
When replacing a pressure switch of this type, verify that the setting range and switching differential match the application requirements. These devices can be mounted directly on the pressure line via a threaded connection or on a flat surface with screws. The switch point is typically adjusted with a screwdriver from outside. Also ensure that the electrical contact arrangement and protection class are compatible with the operating environment.
All specifications
| Protection class (IP) | IP54 |
|---|---|
| Setting range | 1–10 bar |
| Switching differential | 0.3 bar |
| Maximum working pressure | 25 bar |
| Construction type | differential pressure switch |
| Switching element | single-pole changeover switch |
| Function | detect overpressure |
| Adjustment method | adjustable from outside with screwdriver |
| Operating position | vertical |
Part numbers
| SKU | DCM10 |
|---|---|
| Additional article | 534.676.015 |
