Honeywell Intermittent pilot kit Y8610U6006/U

The Honeywell Y8610U6006/U is an intermittent pilot kit for gas-fired burners. It includes a S8610U3009 controller, a VR8304M3558 gas valve, a 390427T pilot burner, a 393690-14 flange, a 393691 natural-gas-to-LPG conversion kit, and a 394800-30 high-voltage cable 760 mm long with a flat 6.35x0.8 mm terminal and an L-shaped 6 mm electrode connection. The system operates on an intermittent pilot flame, igniting at each heat demand and extinguishing on shutdown. Flame is proved by ionisation current measurement. It supports natural gas and LPG fuel types.

For replacement of an intermittent pilot kit, match the pilot burner tip design, electrode gap, gas type (natural gas or LPG), and connector dimensions to the original equipment. The kit must be approved for the specific burner control and gas valve models. During installation, verify the pilot burner orifice matches the gas supply pressure and route electrode wires away from hot surfaces and high-voltage cables.