Kromschroder Burner control unit IFD 258-10/2Q 84621460
SKU 84621460
Model IFD 258-10/2Q
Brand Kromschroder
Photos
no photo yet
Key specifications
| Versorgungsspannung | 120 V |
|---|---|
| Sicherheitszeit | 2 s |
| Flammendetektor-Typ | Ionization or UV |
| Schutzart (IP) | IP54 |
| Ambient temperature | -20–60 °C |
| Weight | 682 g |
| Zertifizierung | EN 746-2 |
| Brennstoff | Gas |
| Safety standard | EN 60730 |
| Air supply | Atmospheric / forced draught |
| Flame detection methods supported | Ionization, UV |
| Installation position | any |
| Ignition type | Direct ignition |
| Sensor voltage | 230 |
| Overvoltage category | III |
| Relative humidity | No condensation permitted |
| Enclosure standard | IEC 529 |
| Cable gland | M16 |
| Frequency range | 50–60 Hz |
| Stromaufnahme | 9 W |
| Reset button operating cycles | 1000 cycles |
| Mains button operating cycles | 1000 cycles |
| Max. number of operating cycles | 250000 |
| Behaviour in the event of flame failure during operation | Immediate fault lock-out or restart |
| Operation type | Continuous operation |
| Frequent cycling suitability | Suitable for frequent cycling |
| Supported burner modes | Modulating and stage-controlled |
| Electronic design | Fully electronic |
| Multi-burner control | Yes |
| Nettogewicht | 0.682 kg |
1016,75 EUR
924,32EUR
in stock · 1
incl. 21% VAT · 763,90 EUR excl. VAT · shipping calculated at checkout
- Worldwide shipping from stock
- Original manufacturer part
- Dispatch within 24 h for stocked items
Beschreibung
Dieses Brennersteuergerät ist für die direkte Zündung und Überwachung von Gasbrennern ausgelegt. Es unterstützt sowohl das Ionisations- als auch das UV-Flammendetektionsverfahren. Das Gerät arbeitet im Dauerbetrieb und eignet sich für häufige Schaltspiele sowie für modulierende und stufengeregelte Brenner. Durch seine vollelektronische Ausführung kann es bei atmosphärischen und Gebläsebrennern sowie in Mehrbrenneranlagen eingesetzt werden, bei denen eine zentrale Steuerung die Vorlüftung und Überwachung übernimmt. Zu den technischen Merkmalen gehören die Versorgungsspannung von 120 V, die Leistungsaufnahme von 9 W, die Sicherheitszeit von 2 s und der Umgebungstemperaturbereich von -20 bis 60 °C.
Weitere Angaben
| Display | Programmstatus und Flammensignalintensität |
|---|---|
| Einbaulage | beliebig |
| Kabelverschraubung | M16 |
| Leistungsaufnahme | ca. 9 VA |
| Netzspannung | 120 V AC, 50/60 Hz |
| Relative Luftfeuchtigkeit | keine Kondensation zulässig |
| Schutzart | IP 54 nach IEC 529 |
| Sensorspannung | ca. 230 V AC |
| Sensorstrom | > 2 µA |
Alle technischen Daten
| Versorgungsspannung | 120 V |
|---|---|
| Sicherheitszeit | 2 s |
| Flammendetektor-Typ | Ionization or UV |
| Schutzart (IP) | IP54 |
| Ambient temperature | -20–60 °C |
| Weight | 682 g |
| Zertifizierung | EN 746-2 |
| Brennstoff | Gas |
| Safety standard | EN 60730 |
| Air supply | Atmospheric / forced draught |
| Flame detection methods supported | Ionization, UV |
| Installation position | any |
| Ignition type | Direct ignition |
| Sensor voltage | 230 |
| Overvoltage category | III |
| Relative humidity | No condensation permitted |
| Enclosure standard | IEC 529 |
| Cable gland | M16 |
| Frequency range | 50–60 Hz |
| Stromaufnahme | 9 W |
| Reset button operating cycles | 1000 cycles |
| Mains button operating cycles | 1000 cycles |
| Max. number of operating cycles | 250000 |
| Behaviour in the event of flame failure during operation | Immediate fault lock-out or restart |
| Operation type | Continuous operation |
| Frequent cycling suitability | Suitable for frequent cycling |
| Supported burner modes | Modulating and stage-controlled |
| Electronic design | Fully electronic |
| Multi-burner control | Yes |
| Nettogewicht | 0.682 kg |
Part numbers
| SKU | 84621460 |
|---|---|
| Additional article | 624.103.163 |
| Model | IFD 258-10/2Q |